The LRC1439 full-vehicle Dynamat Xtreme kit has been put together by LR Parts specifically for Land Rover Defender 110 Station Wagon models from 1983–1998.
Rather than buying individual pre-cut Dynamat sections separately and working out which kits are required, we have combined the appropriate sections into one complete package for the main noise and vibration areas of the vehicle.
A heavy-duty Dynamat installation roller is also included.
Vehicle Fitment
Suitable for:
- Land Rover 110 Station Wagon
- Land Rover Defender 110 Station Wagon
- 1983–1998
Coverage: Main front cabin and rear wheel-arch areas
What Does Dynamat Xtreme Do?
Dynamat Xtreme is a high-performance butyl-based vibration damping material designed to control resonance in vehicle body panels.
Traditional Land Rovers contain large areas of relatively thin aluminium and steel bodywork which can vibrate in response to the engine, drivetrain, tyres and road surface.
Dynamat Xtreme bonds directly to these panels and helps control this movement, reducing the amount of vibration and resonance transmitted into the cabin.
Benefits can include:
- Reduced panel vibration and resonance
- Reduced road and drivetrain noise transmitted through body panels
- Fewer buzzes and rattles
- A more solid feel from the vehicle's panels
- Improved audio clarity
- Reduced vibration around speakers
Why Use Dynamat in a Defender 110 Station Wagon?
The Defender 110 Station Wagon has a large cabin with a substantial amount of bodywork capable of transmitting noise and vibration.
Areas such as the:
- bonnet
- front footwells
- seat box
- rear wheel arches
can all contribute to the characteristic noise levels inside the vehicle.
LRC1439 combines the relevant pre-cut Dynamat sections for these main areas into one complete package.
What's Included?
This LR Parts kit contains:
- DA8091 × 1 – Bonnet sound deadening
- DA8094 × 1 – Footwell sound deadening
- DA8095 × 1 – Seat-box sound deadening
- DA8087 × 1 – Rear wheel-arch sound deadening
- DA8098 × 1 – Heavy-duty Dynamat installation roller
Why Buy the Complete LR Parts Kit?
Dynamat produces individual pre-cut sound-deadening kits for different areas of the Land Rover.
We have combined the appropriate sections for the 1983–1998 Defender 110 Station Wagon into one LR Parts kit, allowing the main areas to be ordered under a single part number.
This means:
- No guessing how much Dynamat is required
- No working out which individual kits need to be combined
- Pre-cut pieces designed around specific areas of the vehicle
- Coverage of the main cabin noise and vibration areas
- Heavy-duty installation roller included
- One convenient package for a larger sound-deadening project
Pre-Cut for Easier Installation
The individual Dynamat sections are pre-cut around the areas of the Land Rover they are intended to cover.
This reduces the amount of measuring and cutting required compared with carrying out the whole installation from bulk sheets.
Some trimming or adjustment may still be necessary because older Defenders can vary considerably and many vehicles have been modified during their lifetime.
How Does Dynamat Xtreme Work?
Dynamat Xtreme consists of a self-adhesive butyl damping layer with an aluminium constraining layer.
Once firmly bonded to a panel, it reduces the panel's tendency to vibrate and resonate.
Correct adhesion is important, which is why this kit includes a heavy-duty Dynamat roller to help work the material firmly onto the vehicle bodywork.
Installation
For the best results, Dynamat should be fitted directly to a clean, dry and sound vehicle surface.
Before installation:
- Remove the relevant interior trim
- Clean the underlying body panels thoroughly
- Remove loose dirt, grease and contamination
- Deal with any corrosion before covering the panel
- Keep drainage holes, wiring and service access points clear
- Use the supplied roller to ensure the Dynamat is firmly bonded to the bodywork
Can the Kit Be Installed in Stages?
Yes.
There is no requirement to complete the whole vehicle in one session.
The front cabin can be treated first, with the rear wheel arches completed later if required. This makes the kit particularly useful during a restoration or interior rebuild.
Improved Audio Performance
Reducing body-panel resonance can also improve an upgraded sound system.
By controlling unwanted panel movement around speakers and larger body panels, Dynamat can help provide:
- Cleaner bass
- Reduced buzzes and rattles
- Better sound definition
- Less unwanted vibration at higher volume
Will Dynamat Completely Soundproof My Defender?
No.
A Defender has many sources of cabin noise including the engine, gearbox, drivetrain, tyres, wind noise, door seals and ventilation openings.
Dynamat Xtreme is primarily intended to reduce vibration and resonance through the vehicle's body panels.
Treating the major areas can make a worthwhile improvement to refinement, but it will not make a traditional Defender silent.
Part Number Information
LR Parts kit: LRC1439
Vehicle: Land Rover Defender 110 Station Wagon
Years: 1983–1998
Product: Dynamat Xtreme
Coverage: Main front cabin and rear wheel-arch areas
Kit assembled by: LR Parts
