Suitable for all rear NAS steps on Defender
Fitting to a 90, M10 x 120mm bolts will not be required
Fitting to a 110, M10 x 60mm bolts will not be required
If your NAS step has fixing point on corners of rear cross member you will also require YRM 1055 if you do not have rear forward facing seats & YRM 1054 if you have rear forward facing seats (not included in this kit) as this for the rear seat belt
These are like for like on Defender rear NAS Step but in Stainless Steel A4-80
A4-80 is the equivalent of Mild Steel 8.8 high tensile bolts
Kits Consists of;
3no M10 A4-80 x 40mm Hex head bolt
2no M10 A4-80 x 60mm Hex head bolt
3no M10 A4 Spring Washers
7no M10 A4 Flat Washers
2no M12 A4-80 x 40mm Hex head bolt
2no M12 A4-80 x 50mm Hex head bolt
6no M12 A4 Flat Washers
2no M16 A4-80 x 30mm Allen Head Bolts
2no M16 A4 Flat Washers
