The towbar mounted cycle carrier can be used if the spare wheel is installed to the vehicle. The towbar mounted cycle carrier can carry 2 cycles. If the spare wheel is not installed then a straight cycle arm mount (VPLER0175) can be installed to the towbar mounted cycle carrier which will allow 3 cycles to be carried.
If the towbar mounted cycle carrier is installed at the same time as the multiheight drop plate towbar then the multiheight drop plate towbar can only be used in the middle or the lower position.
The straight cycle arm mount (VPLER0175) is not included in the towbar mounted cycle carrier kit (VPLER0174 / VPLER0201). This part must be ordered separately if required. The assembly of the straight cycle arm mount to the cycle carrier is the same process as for the cycle arm mount.
A license plate must be installed to the towbar mounted cycle carrier when the cycle carrier is being used.
Not recommended for tow ball made of GGG 40, cast iron or Aluminum (tow ball and 2 cm below the tow ball need to be made out of steel, rest is okay to be aluminum).
