With the introduction of the G4 version TFIIDBTG4, GAP Diagnostic's has adapted its tried and tested G3 TFIIDBT to the latest on-board-diagnostic (OBD) hardware introduced by Land Rover: diagnostics over IP (DoIP). While this hardware change in the G4 will allow the IIDtool to communicate fully with all ECUs in the lates vehicles, it also means that the G4's OBD connector no longer has the capacity to support earlier vehicles.
The G4 IIDTool will support all vehicles from MY 2005 on* while the IIDTool G3 will support all vehicles from 2002 to 2016*. The IIDPRO will encompass both a G3 unit and a G4 unit.
Upgrades from a G3 to a G4 or for Pro systems are available - please see www.gap-diagnostic.com for details. A functionality table by vehicle type and model year is available at www.gap-diagnostic.com/products/iidtool for details.
Vehicle Coverage -
- Defender (2020 onwards)
- Discovery 3
- Discovery 4 (adaption loom needed)
- Discovery 5
- Discovery Sport (2014-2019)(adaption loom needed)
- Discovery Sport (2020 onwards)
- Freelander 2
- Range Rover L322 (2010 onwards)(adaption loom needed)
- Range Rover L494 (2014-2016)(adaption loom needed)
- Range Rover L494 (2017 onwards)
- Range Rover L405 (2013-2016)(adaption loom needed)
- Range Rover L405(2017 onwards)
- Range Rover L460
- Range Rover Evoque (2011-2017)(adaption loom needed)
- Range Rover Evoque (2018 onwards)
- Range Rover Sport L320
- Range rover Velar
- Range Rover Sport L461
Adoption loom product code is if needed TFIIDADPT
Range Rover L322 2002-2009 and Defender L316 2007-2015 are not supported by the G4. Please consider the original G3 for these vehicles.
The GAP IIDTool has full diagnostic capability which includes:
Faults read / clear of all vehicle systems
Service routines including service reminder reset
Live data
Manual components activation (Output control)
Calibrations
The Advanced Programming Functions are VIN locked and include:
Vehicle control modules software updates (ECU Re-flashing)
Engine tuning, EGR Patching, Speed limiter raising and more
Car configuration / personalisation (CCF editing)
Height adjustment (front, rear or all)
Suspension individual sensor calibration (needed after a repair)
Backup of original height and CCF values
3 personalised height profiles
The GAP IIDTool also has multi-vehicle support, integrated interface. This integrated interface allows for more in-depth diagnostic capabilities and added functionality.
Compatible with Apple mobile devices running on OS 11 onwards. Android devices fitted with a Bluetooth V4.2 transceiver and running on OS 8 or higher. Low cost generic Android devices rarely work.
The iOS/Android Application includes the following features:
Easy access to all Diagnostic and Programming functions
Email exportation of faults, live data and ECU info
Real-time logging of live data
Up to 8 live data values displayed simultaneously on graph and numerical views
Plus much, much more...
Updates are free with the GAP IIDTool!!
If you are unsure of a specific function of the GAP Diagnostic tool, please contact GAP Diagnostics directly for information on its use and features BEFORE purchasing. Unfortunately, we cannot provide refunds for GAP Diagnostic tools once they have been activated on the car.