The MUD Cubby-Box Locker provides additional 11-litres of internal storage in within the cabin of the Land Rover Defender.
Quickly and easily installed beneath the cubby-box the MUD Cubby-Box Locker frees up easy access extra storage space in your vehicle whilst at the same time creating discreet and secure storage location for valuables. It rests against the bulkhead when open allowing you access to the storage underneath.
Each MUD Cubby-Box Locker contains three 28mm pre-drilled holes, one at the front and two at the rear of the locker for adding additional USB sockets or 12 V power sources.
Please Note:
The MUD Cubby-Box Locker has been designed to fit the standard factory fit cubby-box fixing positions. The positioning of the cubby-box bolt holes may vary on Defender models. We have tried to accommodate all of those variations we found when developing the product, however, you may find you need to elongate the fixing holes in some vehicles especially when fitted with aftermarket cubby-boxes or where a vehicle has had a centre seat or document tray replaced with a cubby-box.
The loadspace bulkhead on the Defender ultimately limits how far the hinging MUD Cubby-Box Locker will tilt backwards. Other factors are the height of the cubby-box (especially on aftermarket boxes) and whether you have a bulkhead removal bar installed. We envisage use of the MUD Cubby-Box Locker will be restricted to occasional use so feel this is a compromise worth making for the extra storage the product provides.
The MUD Cubby Box Locker will not fit in Truck Cab models.
Will my XYZ Cubby Box fit onto the Cubby Box Locker Top Panel?
Due to the vast amount of aftermarket Cubby Box's would be impossible for us to definitively say that the MUD Cubby Box Locker will fit every aftermarket cubby box ever ever created. Refer to the following dimensions to find out whether the base of your cubby is compatible with the MUD Cubby Box Locker top plate
Sliding Locker top plate. 407 x 294mm
Hinging Locker top plate: 410 x 277mm
The MUD Cubby Box Locker is 109mm Deep.
Internal Dimensions
Total dimensions without divider- 420mm x 245mm (depth 95mm)
