Heavy TD5 clutch pedal?
THE REVOLUTIONARY POWERslave
We have designed an affordable, cost effective Slave cylinder that reduces the weight of the pedal significantly.
This slave can be fitted to both the Td5 Discovery and also the Td5 Defender
**POWERslave lowers the biting point of the clutch, on Defender models this can be adjusted in the pedal box, For Discovery 2 TD5 we suggest installing once a clutch is bedded in (Biting point higher, as the pedal box is not adjustable and may not clear with a brand new clutch )**
- 30% lighter than OEM set up
THE REVOLUTIONARY POWERmaster
We have designed an affordable, cost effective Master cylinder that reduces the weight of the pedal significantly.
This Master can be fitted to All Defenders & Series 3, Also can be fitted with LOF POWERspring for best results
*Cannot be fitted in conjunction with the LOF POWER Slave cylinder* * Please do not fit with a brand new clutch until it is fully bedded in *
- 30% lighter than OEM set up
1. Does the POWERmaster fit my vehicle?
The LOF POWERmaster will fit Defender & Series models fitted with a ‘Girling type’ Master as standard, part number STC500100.
2. How easy is the Master to fit?
*SEE FITTING INSTRUCTIONS BELOW*
25 minutes to fit
You will need:
- Brake Fluid
- 10, 11, 13, 14mm open ended spanners
- 10mm socket, extension and ratchet
- bleeding kit not necessary but can help
- Phillips screw driver
THE REVOLUTIONARY POWERspring PEDAL KIT
We have designed an affordable, cost effective pedal assist spring that reduces the weight of the pedal significantly.
As seen in the Land Rover Owners International Magazine!
THIS IS 45% STRONGER/ LIGHTER THAN THE LAND ROVER OVER-CENTRE SPRING AS FITTED TO TDCI VEHICLES
- 45% lighter than OEM "Pedal assist spring"
-80% lighter than no spring at all! (When retro fitted to TD5/ 300Tdi etc)
1. Does the POWERspring fit my DEFENDER?
The LOF POWERspring will fit Defender models 300TDI, TD5 and also TDCI PUMA vehicles.
In order to double check that it will fit, simply take a look at your clutch pedal:
- If the clutch pedal arm is a flat sheet of steel in terms of profile - IT FITS!
- If the clutch pedal arm is a U shaped formed steel profile, unfortunately it wont fit, but there is a solution! Simply remove the older 200TDI style pedal box (6 bolts in the footwell) and refit with the later style pedal box - Part number SKB500280 (sold separately)
