This is a Pair of + 2 inch Front Spring Spacers, these spring spacers bolt onto your axle giving an instant lift, the front ones allow the shock to bolt onto its original mounting point on the axle which means you can fit a STD,+2 or even our CHALL shocks without the shocks topping out which is a known problem with many other front spring spacers as they lift the shock as well as the spring, there is also plenty of room for the shock to move right to left and front to back on extreme articulation see the pictures, others don’t allow this and can causes the bottom of the shock to break off.
They come with all bolts, nuts and washers required to fit them, they are also galvanized to prolong life.
We do spring spacers Front and Rear, 1 inch, 1.5 inch, 2 inch and 6mm rear spring trimmer packs.
*NOTE* Our front spring retainers can not be use used with our front spring spacers, please see the last few pictures of how we clamp the spring to the spacer using hose clips. Using this method the spring can still move away from the spacer seat in the same way as with our Challenge Front Spring Retainers.
