These turrets are standard height, they are made from 6mm steel, you can fit standard length shocks or a + 2 inch shock with these.
Combine with our Heavy Duty Turret Securing Rings GL1053 to Secure theses Turrets to your Chassis.
They have a built in spring re-locator to guide the spring back in if it dislocates, its the same as fitting dislocation cones but it is built all in one to cut the cost of 2 items. (Not suitable for use with Koni Big Bore Shocks as the larger diameter of the shock may fowl the inside of the relocator)
The longer part of the relocator must go against the chassis.
The turret base plate also has flats faces cut in them, this is to minimise any tyre rubbing on full articulation and also makes it easier to fit the turret under the inner wing, you can see this on one of the pictures.
Sold as a pair and they are also galvanized to prolong there life.
